Offering you a complete choice of products which include af3 60 active harmonic filter, af3 30 active harmonic filter, af3 150 active harmonic filter, af3 100 active harmonic filter, af3 200 active harmonic filter and af3 300 active harmonic filter.
Operating Principle: Liebert AF3 latest technology to eliminate harmonic injected into the mains supply by non linear loads, as well supplies inductive power demanded by the load, so as to correct input power factor to near unity.
Current harmonic elimination is achieved by sensing load current & extracting harmonic current signal. This and the reactive current signal, together are used to generate a reference for the controlled current source connected at the PCC(point of common connection) of source and load.This results in mains supplying only real power for the load and reactive & harmonics being sourced from the AF3.This is carried out dynamically,so that any change in the load pattern or its nature is immediately responded without any manual intervention.
In the following example first figure shows the recorded input current waveform of a six pulse thyristorised rectifier.
Bottom figure shows considerable improvement in the waveform due to AF3 connected in shunt.
One is with only harmonic correction and the other is with power factor & harmonic correction.
Operating Principle: Liebert AF3 latest technology to eliminate harmonic injected into the mains supply by non linear loads, as well supplies inductive power demanded by the load, so as to correct input power factor to near unity.
Current harmonic elimination is achieved by sensing load current & extracting harmonic current signal. This and the reactive current signal, together are used to generate a reference for the controlled current source connected at the PCC(point of common connection) of source and load.This results in mains supplying only real power for the load and reactive & harmonics being sourced from the AF3.This is carried out dynamically,so that any change in the load pattern or its nature is immediately responded without any manual intervention.
In the following example first figure shows the recorded input current waveform of a six pulse thyristorised rectifier.
Bottom figure shows considerable improvement in the waveform due to AF3 connected in shunt.
One is with only harmonic correction and the other is with power factor & harmonic correction.
Operating Principle: Liebert AF3 latest technology to eliminate harmonic injected into the mains supply by non linear loads, as well supplies inductive power demanded by the load, so as to correct input power factor to near unity.
Current harmonic elimination is achieved by sensing load current & extracting harmonic current signal. This and the reactive current signal, together are used to generate a reference for the controlled current source connected at the PCC(point of common connection) of source and load.This results in mains supplying only real power for the load and reactive & harmonics being sourced from the AF3.This is carried out dynamically,so that any change in the load pattern or its nature is immediately responded without any manual intervention.
In the following example first figure shows the recorded input current waveform of a six pulse thyristorised rectifier.
Bottom figure shows considerable improvement in the waveform due to AF3 connected in shunt.
One is with only harmonic correction and the other is with power factor & harmonic correction.
Operating Principle: Liebert AF3 latest technology to eliminate harmonic injected into the mains supply by non linear loads, as well supplies inductive power demanded by the load, so as to correct input power factor to near unity.
Current harmonic elimination is achieved by sensing load current & extracting harmonic current signal. This and the reactive current signal, together are used to generate a reference for the controlled current source connected at the PCC(point of common connection) of source and load.This results in mains supplying only real power for the load and reactive & harmonics being sourced from the AF3.This is carried out dynamically,so that any change in the load pattern or its nature is immediately responded without any manual intervention.
In the following example first figure shows the recorded input current waveform of a six pulse thyristorised rectifier.
Bottom figure shows considerable improvement in the waveform due to AF3 connected in shunt.
One is with only harmonic correction and the other is with power factor & harmonic correction.
Operating Principle: Liebert AF3 latest technology to eliminate harmonic injected into the mains supply by non linear loads, as well supplies inductive power demanded by the load, so as to correct input power factor to near unity.
Current harmonic elimination is achieved by sensing load current & extracting harmonic current signal. This and the reactive current signal, together are used to generate a reference for the controlled current source connected at the PCC(point of common connection) of source and load.This results in mains supplying only real power for the load and reactive & harmonics being sourced from the AF3.This is carried out dynamically,so that any change in the load pattern or its nature is immediately responded without any manual intervention.
In the following example first figure shows the recorded input current waveform of a six pulse thyristorised rectifier.
Bottom figure shows considerable improvement in the waveform due to AF3 connected in shunt.
One is with only harmonic correction and the other is with power factor & harmonic correction.
Operating Principle: Liebert AF3 latest technology to eliminate harmonic injected into the mains supply by non linear loads, as well supplies inductive power demanded by the load, so as to correct input power factor to near unity.
Current harmonic elimination is achieved by sensing load current & extracting harmonic current signal. This and the reactive current signal, together are used to generate a reference for the controlled current source connected at the PCC(point of common connection) of source and load.This results in mains supplying only real power for the load and reactive & harmonics being sourced from the AF3.This is carried out dynamically,so that any change in the load pattern or its nature is immediately responded without any manual intervention.
In the following example first figure shows the recorded input current waveform of a six pulse thyristorised rectifier.
Bottom figure shows considerable improvement in the waveform due to AF3 connected in shunt.
One is with only harmonic correction and the other is with power factor & harmonic correction.
